View VNL5300S5-E_8366853.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. december 2013 docid023394 rev 5 1/21 VNL5300S5-E omnifet iii fully protected low-side driver datasheet - production data features ? drain current: 2 a ? esd protection ? overvoltage clamp ? thermal shutdown ? current and power limitation ? very low standby current ? very low electromagnetic susceptibility ? compliant with european directive 2002/95/ec ? open drain status output description the VNL5300S5-E is a monolithic device made using stmicroelectronics ? vipower ? technology, intended for driving resistive or inductive loads with one side connected to the battery. built-in thermal shutdown protects the chip from overtemperature and short-circuit. output current limitation protects the device in an overload condition. in case of long duration overload, the device limits the dissipated power to a safe level up to thermal shutdown intervention. thermal shutdown, with automatic restart, allows the device to recover normal operation as soon as a fault condition disappears. fast demagnetization of inductive loads is achieved at turn-off. type v clamp r ds(on) i d VNL5300S5-E 41 v 300 m 2 a so-8 table 1. devices summary package order codes tube tape and reel so-8 VNL5300S5-E vnl5300s5tr-e www.st.com
contents VNL5300S5-E 2/21 docid023394 rev 5 contents 1 block diagrams and pins configurations . . . . . . . . . . . . . . . . . . . . . . . . 5 2 electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1 absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2 thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.3 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3 application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.1 mcu i/o protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4 package and pc board thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.1 so-8 thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5 package and packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.1 ecopack ? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.2 so-8 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.3 so-8 packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
docid023394 rev 5 3/21 VNL5300S5-E list of tables 3 list of tables table 1. devices summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 table 2. pin function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 table 3. suggested connections for unused and n.c. pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 table 4. absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 table 5. thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 table 6. powermos section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 table 7. source drain diode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 table 8. status pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 table 9. logic input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 table 10. openload detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 11. supply section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 12. switching characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 table 13. protection and diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 table 14. truth table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 table 15. so-8 thermal parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 table 16. so-8 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 table 17. document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
list of figures VNL5300S5-E 4/21 docid023394 rev 5 list of figures figure 1. block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 figure 2. current and voltage conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 figure 3. configuration diagrams (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 figure 4. switching characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 figure 5. application schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 figure 6. maximum demagnetization energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 figure 7. so-8 pc board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 figure 8. so-8 rthj-amb vs pcb copper area in open box free air condition . . . . . . . . . . . . . . . . . . 14 figure 9. so-8 thermal impedance junction ambient single pulse. . . . . . . . . . . . . . . . . . . . . . . . . . . 15 figure 10. thermal fitting model of a lsd in so-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 figure 11. so-8 package dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 figure 12. so-8 tube shipment (no suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 figure 13. so-8 tape and reel shipment (suffix ?tr?) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 9
docid023394 rev 5 5/21 VNL5300S5-E block diagrams and pins configurations 20 1 block diagrams and pins configurations figure 1. block diagram table 2. pin function name function input voltage controlled input pin with hysteresis, cmos compatible. it controls output switch state drain powermos drain source powermos source and ground reference for the control section supply voltage supply voltage connected to the signal part (5 v) status open drain digital diagnostic pin $2!). &rqwuro 'ldjqrvwlf /2*,& '5,9(5 &xuuhqw /lplwdwlrq 3rzhu &odps 2))6wdwh 2shqordg 29(57(03(5$785( 3527(&7,21 29(5/2$'3527(&7,21 $&7,9(32:(5/,0,7$7,21 ,1387 67$786 *1' 6833/< 6833/< 92/7$*( ("1($'5
block diagrams and pins configurations VNL5300S5-E 6/21 docid023394 rev 5 figure 2. current and voltage conventions figure 3. configuration diagrams (top view) table 3. suggested connections for unused and n.c. pins connection / pin status n.c. input floating x (1) 1. x: do not care. xx to ground not allowed x through 10 k resistor */165 4611-: 70-5"(& %3"*/ 4063$& 45"564 * % 7 %4 * 45"5 * */ 7 */ 7 45"5 ("1($'5 * 4 7 4611-: so-8
docid023394 rev 5 7/21 VNL5300S5-E electrical specifications 20 2 electrical specifications 2.1 absolute maximum ratings stressing the device above the rating listed in ta ble 4 may cause permanent damage to the device. these are stress ratings only and operation of the device at these or any other conditions above those indicated in the operating sections of this specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2.2 thermal data table 4. absolute maximum ratings symbol parameter value unit v ds drain-source voltage (v in = 0 v) internally clamped v i d dc drain current internally limited a -i d reverse dc drain current 6 a i s dc supply current -1 to 10 ma i in dc input current -1 to 10 ma i stat dc status current -1 to 10 ma v esd1 electrostatic discharge (r = 1.5 k ; c = 100 pf) ? drain ? supply, input, status 5000 4000 v v esd2 electrostatic discharge on output pin only (r = 330 , c = 150 pf) 2000 v t j junction operating temperature -40 to 150 c t stg storage temperature -55 to 150 c e as single pulse avalanche energy (l = 19 mh, t j = 150 c, r l =0, i out =i liml ) 26 mj table 5. thermal data symbol parameter maximum value unit r thj-amb thermal resistance junction-ambient 115 c/w
electrical specifications VNL5300S5-E 8/21 docid023394 rev 5 2.3 electrical characteristics values specified in this section are for v supply =v in = 4.5 v to 5.5 v, -40c < t j < 150c; unless otherwise stated. table 6. powermos section symbol parameter test conditions min. typ. max. unit v supply operating supply voltage - 3.5 5 5.5 v r on on-state resistance i d = 0.8 a; t j =25 c, v supply =v in =4.5v 300 m i d = 0.8 a; t j =150c, v supply =v in =4.5v 600 v clamp drain-source clamp voltage v in =0v; i d =0.8a 414652 v v clth drain-source clamp threshold voltage v in =0v; i d =2ma 36 v i dss off-state output current v in =0v; v ds =13v; t j =25c 03 a v in =0v; v ds =13v; t j =125c 05 table 7. source drain diode symbol parameter test conditions min. typ. max. unit v sd forward on voltage i d = 0.8 a; v in =0v ? 0.8 ? v table 8. status pin symbol parameter test conditions min. typ. max. unit v stat status low output voltage i stat =1ma 0.5 v i lstat status leakage current normal operation, v stat =5v 10 a c stat status pin input capacitance normal operation, v stat =5v 100 pf v stcl status clamp voltage i stat =1ma 5.5 7 v i stat =-1ma -0.7 table 9. logic input symbol parameter test conditions min. typ. max. unit v il low-level input voltage 0.9 v i il low-level input current v in =0.9v 1 a v ih high-level input voltage 2.1 v i ih high-level input current v in =2.1v 10 a v i(hyst) input hysteresis voltage 0.13 v
docid023394 rev 5 9/21 VNL5300S5-E electrical specifications 20 v icl input clamp voltage i in =1ma 5.5 7 v i in =-1ma -0.7 table 10. openload detection symbol parameter test conditions min. typ. max. unit v ol openload off-state voltage detection threshold v in = 0 v 0.6 1.2 1.7 v t d(oloff) delay between input falling edge and status falling edge in openload condition i out =0a 45 425 1100 s table 11. supply section symbol parameter test conditions min. typ. max. unit i s supply current off-state; t j =25c; v in =v drain =0v; 10 25 a on-state; v in =5v; v ds =0v 25 65 v scl supply clamp voltage i scl =1ma 5.5 7 v i scl =-1ma -0.7 table 12. switching characteristics (1) 1. see figure 5: application schematic symbol parameter test conditions min. typ. max. unit t d(on) turn-on delay time r l =16 ; v cc =13v (2) 2. see figure 4: switching characteristics ?8?s t d(off) turn-off delay time r l =16 ; v cc =13v (2) ?12?s t r rise time r l =16 ; v cc =13v (2) ?11?s t f fall time r l =16 ; v cc =13v (2) ?7?s w on switching energy losses at turn-on r l =16 ; v cc =13v (2) ?0.026? mj w off switching energy losses at turn-off r l =16 ; v cc =13v (2) ?0.016? mj q g total gate charge v supply =v in = 5 v ? 0.6 ? nc table 9. logic input (continued) symbol parameter test conditions min. typ. max. unit
electrical specifications VNL5300S5-E 10/21 docid023394 rev 5 table 13. protection and diagnostics symbol parameter test conditions min. typ. max. unit i limh dc short-circuit current v ds =13v; v supply =v in =5v 22.83.8a i liml short-circuit current during thermal cycling v ds =13v; t r docid023394 rev 5 11/21 VNL5300S5-E electrical specifications 20 figure 4. switching characteristics
application information VNL5300S5-E 12/21 docid023394 rev 5 3 application information figure 5. application schematic 3.1 mcu i/o protection st suggests to insert a resistor (r prot ) in line to prevent the microcontroller i/o pins from latching up (a) . the value of these resistors is a compromise between the leakage current of microcontroller and the current required by the lsd i/os (input levels compatibility) with the latch-up limit of microcontroller i/os: equation 1 let: ? i latchup > 20 ma ? v ohc > 4.5 v ? 35 r prot 100 k then, the recommended value is r prot =1 k '!0'#&4 96833/< 9 67$786 '5$,1 6285&( 5surw 5surw 5vxsso\ ,1387 9 5 / 9ff 0lfur&rqwuroohu n a. in case of negative transient on the drain pin. 0.7 i latchup -------------------- r prot v oh c v ih ? () i ih max --------------------------------------- ?
docid023394 rev 5 13/21 VNL5300S5-E application information 20 figure 6. maximum demagnetization energy 1. values are generated with r l =0 . in case of repetitive pulses, t jstart (at the beginning of each demagnetization) of every pulse must not exceed the temperature specif ied above for curves a and b. 0.1 1 10 1 10 100 1000 i(a) l(mh) vnl5300 - maximum turn off current versus inductance vnl5300 - single pulse repetitive pulse tjstart=100c repetitive pulse tjstart=125c 1 10 100 1000 0.01 0.1 1 10 100 e[mj] tdemag [ms] vnl5300 - maximum turn off energy versus tdemag vnl5300 - single pulse repetitive pulse tjstart=100c repetitive pulse tjstart=125c gapg1107131511cft
package and pc board thermal data VNL5300S5-E 14/21 docid023394 rev 5 4 package and pc board thermal data 4.1 so-8 thermal data figure 7. so-8 pc board note: layout condition of r th and z th measurements (board finish thickness 1.6 mm +/- 10%; board double layer; board dimension 78 mm x 86 mm; board material fr4; cu thickness 0.070 mm (front and back side); thermal vias separation 1.2 mm; thermal via diameter 0.3 mm +/- 0.08 mm; cu thickness on vias 0.025 mm). figure 8. so-8 r thj-amb vs pcb copper area in open box free air condition ("1($'5 57+mdpe 1$#$vifbutjolbsfb dn?
sfgfsup1$#mbzpvu
("1($'5
docid023394 rev 5 15/21 VNL5300S5-E package and pc board thermal data 20 figure 9. so-8 thermal impeda nce junction ambient single pulse equation 2: pulse calculation formula where =t p /t figure 10. thermal fitting model of a lsd in so-8 note: the fitting model is a semplified thermal tool and is valid for transient evolutions where the embedded protections (power limitation or thermal cycling during thermal shutdown) are not triggered. =7+?&: 7lphv &x irrwsulqw &x fp ("1($'5 z th r th z thtp 1 ? () + ? = gapgcft00533
package and pc board thermal data VNL5300S5-E 16/21 docid023394 rev 5 table 15. so-8 thermal parameters area/island (cm 2 ) footprint 2 r1 (c/w) 2.8 2.8 r2 (c/w) 3.7 3.7 r3 (c/w) 3.5 3.5 r4 (c/w) 34 25 r5 (c/w) 36 20 r6 (c/w) 35 27 c1 (w.s/c) 0.00002 0.00002 c2 (w.s/c) 0.001 0.001 c3 (w.s/c) 0.005 0.005 c4 (w.s/c) 0.02 0.02 c5 (w.s/c) 0.15 0.15 c6 (w.s/c) 2.5 3.5
docid023394 rev 5 17/21 VNL5300S5-E package and packing information 20 5 package and packing information 5.1 ecopack ? in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. 5.2 so-8 mechanical data figure 11. so-8 package dimensions gapgcft00145
package and packing information VNL5300S5-E 18/21 docid023394 rev 5 5.3 so-8 packing information figure 12. so-8 tube shipment (no suffix) table 16. so-8 mechanical data symbol millimeters min. typ. max. a 1.75 a1 0.10 0.25 a2 1.25 b0.28 0.48 c0.17 0.23 d (1) 1. dimensions d does not include mold flash, protrusions or gate burrs. mold flash, potrusions or gate burrs shall not exceed 0.15 mm in total (both side). 4.80 4.90 5.00 e 5.80 6.00 6.20 e1 (2) 2. dimension ?e1? does not include in terlead flash or protrusions. interl ead flash or protrusions shall not exceed 0.25 mm per side. 3.80 3.90 4.00 e1.27 h0.25 0.50 l0.40 1.27 l1 1.04 k0 8 ccc 0.10 all dimensions are in mm. base q.ty 100 bulk q.ty 2000 tube length ( 0.5) 532 a 3.2 b 6 c ( 0.1) 0.6 c b a
docid023394 rev 5 19/21 VNL5300S5-E package and packing information 20 figure 13. so-8 tape and reel shipment (suffix ?tr?) tape dimensions according to electronic industries association (eia) standard 481 rev. a, feb. 1986 all dimensions are in mm. tape width w 12 tape hole spacing p0 ( 0.1) 4 component spacing p 8 hole diameter d (+ 0.1/-0) 1.5 hole diameter d1 (min) 1.5 hole position f ( 0.05) 5.5 compartment depth k (max) 4.5 hole spacing p1 ( 0.1) 2 top cover tape end start no components no components components 500mm min 500mm min empty components pockets saled with cover tape. user direction of feed reel dimensions all dimensions are in mm. base q.ty 2500 bulk q.ty 2500 a (max) 330 b (min) 1.5 c ( 0.2) 13 f 20.2 g (+ 2 / -0) 12.4 n (min) 60 t (max) 18.4
revision history VNL5300S5-E 20/21 docid023394 rev 5 6 revision history table 17. document revision history date revision changes 02-jul-2012 1 initial release. 23-may-2013 2 table 5: thermal data : ?r thj-amb : updated value table 6: powermos section : ?r on : updated value table 11: supply section : ?i s : updated value table 12: switching characteristics : ?t d(on) , t d(off) , t r , w on , w off : updated values table 13: protection and diagnostics : ?t dliml : updated value updated figure 5: application schematic updated section 3.1: mcu i/o protection updated chapter 4: package and pc board thermal data 18-jul-2013 3 table 4: absolute maximum ratings : ?-i d : updated value ?e as : updated parameter value table 12: switching characteristics : ?t d(on) , t r , w on , w off : updated typical values added figure 6: maximum demagnetization energy 18-sep-2013 4 updated disclaimer. 13-dec-2013 5 table 6: powermos section : ?r on : updated test conditions
docid023394 rev 5 21/21 VNL5300S5-E 21 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2013 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of VNL5300S5-E

	To Download VNL5300S5-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .